China Yuhuan Lai Gema tool factory
TEL:+86-576-87445252
+86-576-87446565
+86-576-87440707
013967680618
  • TL-200R
    TL-568R
    TL-N5684R
    TL-500R
    TL-546
    TL-2008R

  • SUITABLE FOR 8 PIN TELEPHONE TERMINAL PINCER

  • HT-2008R RATCHET TYPE
    Range of Application

  • SUITABLE FOR 6 PIN TELEPHONE TERMINAL PINCER

  • HS-2094RATCHET TYPE
    SUITABLE FOR 4 PIN TELEPHONE TERMINAL PINCER

  • HT-86RATCHET TYPE
    SUITABLE FOR 6 PIN TELEPHONE TERMINAL PINCER

  • For cutting wire, 30mm max., stripping wire 0.9-6mm2
    Automatic rebound spring
    No damaging of the conductor core

  • For cutting wire, 30mm max., stripping wire 2.0-2.4mm2
    Automatic rebound spring
    No damaging of the conductor core

  • For cutting wire, 30mm max., stripping wire 0.9-6mm2
    Automatic rebound spring
    No damaging of the conductor core

  • For cutting wire, 30mm max., stripping wire 0.25-0.65mm2,and crimping terminals,tec.
    Automatic rebound spring
    No damaging of the conductor core

  • For cutting wire, 30mm max., stripping wire 0.2-1.25mm2,and crimping terminals,tec.
    Automatic rebound spring
    No damaging of the conductor core

  • For cutting wire, 30mm max., stripping wire 0.9-6mm2,and crimping terminals,tec.
    Automatic rebound spring
    No damaging of the conductor core

  • For cutting wire, 30mm max., crimping terminals,tec.
    Automatic rebound spring
    No damaging of the conductor core

  • For cutting wire, 30mm max., stripping wire 6-16mm2,and crimping terminals,tec.
    Automatic rebound spring
    No damaging of the conductor core

  • BX-90
    strip-40-90mm cable between the middle and terminal insulating layer, cutting thickness can be adjusted according to the need to ensure the blade is not touching cables The metal layer operations, worn or damaged blade can be replaced or grinding.

  • Type PG-5 stripping pliers is applicable for stripping off insulation on cables of more than 25mm dia.(1" dia).Cutting depth 0-5 mm.
    By using the adjusting screw, the cutting depth (0-5mm) can be adjusted according to the thickness of the outer insulation.
    To begin cutting in either direction, the blade is pressed and guided by operato’s thumb .The cutting of the outer insulation is achieved by means of small move ments and pressure on gear towards the insulation at the same time.
    The blade can be turned between length and diameter cutting at any time.
    In order to remove the joint of the insulation the blade must be pressed into the insulation.

  • Tonnage(T) :10T
    Travels(mm):50mm
    Pressure area:13.8cm 2
    Oilreserves:0.073L
    original height:139mm
    General high:189mm
    OD:58mm
    ID:43mm
    plunger Dia:38mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):17mm
    Weight:3kg

  • Tonnage(T) :20T
    Travels(mm):50mm
    Pressure area:26.4cm 2
    Oilreserves:0.14L
    original height:157mm
    General high:207mm
    OD:88mm
    ID:65mm
    plunger Dia:58mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):20mm
    Weight:5.5kg

  • Tonnage(T) :30T
    Travels(mm):50mm
    Pressure area:41.8cm 2
    Oilreserves:0.208L
    original height:157mm
    General high:407mm
    OD:107mm
    ID:75mm
    plunger Dia:68mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):20mm
    Weight:6.8kg

  • Name:RSC Single-action hydraulic jacks

    Tonnage(T) :50T
    Travels(mm):50mm
    Pressure area:78.5cm 2
    Oilreserves:0.35L
    original height:163mm
    General high:213mm
    OD:127mm
    ID:95mm
    plunger Dia:85mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):26mm
    Weight:9.8kg

  • Tonnage(T) :100T
    Travels(mm):50mm
    Pressure area:103.8cm 2
    Oilreserves:0.66L
    original height:149mm
    General high:199mm
    OD:177mm
    ID:130mm
    plunger Dia:110mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):28mm
    Weight:24kg

  • Tonnage(T) :10T
    Travels(mm):150mm
    Pressure area:13.8cm 2
    Oilreserves:0.22L
    original height:239mm
    General high:389mm
    OD:58mm
    ID:43mm
    plunger Dia:38mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):17mm
    Weight:4.3kg

  • Tonnage(T) :30T
    Travels(mm):100mm
    Pressure area:41.8cm 2
    Oilreserves:0.624L
    original height:257mm
    General high:407mm
    OD:107mm
    ID:75mm
    plunger Dia?:68mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):20mm
    Weight:12.5kg

  • Tonnage(T) :50T
    Travels(mm):150mm
    Pressure area:78.5cm 2
    Oilreserves:1.06L
    original height:263mm
    General high:413mm
    OD:127mm
    ID:95mm
    plunger Dia:85mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):26mm
    Weight:22kg

  • Tonnage(T) :100T
    Travels(mm):100mm
    Pressure area:103.8cm 2
    Oilreserves:1.32L
    original height:249mm
    General high:349mm
    OD:177mm
    ID:130mm
    plunger Dia:110mm
    Thread for input oil-port(ZG):3/8"-19ZG
    Saddle Protrusion from plgr.(mm):28mm
    Weight:30kg

  • FUNCTION
    Using new type hydraulic gear puller is convenient for operating.
    Workers can exchange two jaws and three jaws freely in the scene working.
    The puller can be touched working center quickly after rotary according to the distance between puller and piston center.
    It can choose pump freely.
    The jaws with three can be adjusted from high to low point.

    Model Output(T) Spread(mm) Reach(mm) Ares Travel (mm)
    EP-10 10 250 160 60
    Remark:Split-unit hydraukic gear puller

  • Product name
    Integral-unit Hydraulic gear puller CK-20T
    Brand or place
    YIMA(CHINA) TOOLS
    Model
      CK-20T
    Product Description

     

    Using new type of hydraulic gear puller is conveniet for operating.

    Workers can exchange two jaws and three jaws freely in the scene working.

    The puller can be touched working center quickly after rotary according to the distance between puller and piston center.

    It can choose pump freely

    The jaws with three can be adjusted from high to low point.

     

     

    Model
    OutPut(T)
    Spread(mm)
    Reach(mm)
    Ares Travel(mm)
    CK-20
    20
    350
    200
    50
     

  • Product name :Applicable Range :16-300 mm² 
    Product:Hydraulic Crimping Tool 
    Model:HP-300B/HP-240B (Two Model) 
    Descript :  
    Press tools is suitable for DIN.AWG.JIS.; 
    There is a safe protective equipment of "kacha"voice when is reaches to high or low pressure; 
    Only one person can work; 
    Pump is connected to the tools,it can turn 180?? degree when pressed on the head; 
    Cu400mm2,Al300mm2,Terminal or below them can be connected fast; 
    Split desigh with convenient use; 
    Comes complete with double mould plastic case; 


    Model:HP-240B /HP-300B 
    Crimping Range(mm²) :16²-240²/16²-300² 
    Output(T):13/13 
    Travel(mm):22/22 
    Mould disposition(mm²) :16,25,35,50,70,95,120,150,185,240
    /16,25,35,50,70,95,120,150,185,240,300 
    Connect form :Besiege pressuere /Besiege pressuere

  • Product name :Hydraulic crimping tools 
    Model         /Crimping range(mm2) /Output/Ram Stroke/Standard Mould (mm2)/Crimping type 
                      Al Terminal/Cu Terminal 
        
    YQK-240  10-185  /16-240   12T    22mm   16,25,35,50,70,95,120,150,185,240Hexagon  
    YQK-300  10-240  /16-300   13T    22mm   16,25,35,50,70,95,120,150,185,240,300Hexagon 
    KYQ-240  10-185  /16-240    12T   22mm    16,25,35,50,70,95,120,150,185,240Hexagon 
    YYQ-120  10-95    /10-120     8T    16mm    10,16,25,35,50,70,95,120Hexagon 
    HP-120    10-95    /10-120    8T     16mm    10,16,25,35,50,70,95,120Hexagon 
    HP-120B  10-95    /10-120    8T     16mm    10,16,25,35,50,70,95,120Hexagon 
    HP-120C  10-95    /10-120    8T     16mm    10,16,25,35,50,70,95,120Hexagon 
    YQK-70    10-50    /4-70        5T     12mm    4,6,10,16,25,35,50,70Hexagon 
    HP-70C   10-50     /4-70        6T     12mm    4,6,10,16,25,35,50,70Hexagon

  • Product name :Hydraulic crimping tools 
    FUNCTION 
    Press tools is suitable for DIN,AWG,JIS. 
    There is a safe protective equipment of "Kacha" 
    voice when it reaches to high or low voltage. 
    Only one person can work. 
    Pump is connected to the tools, it can turn 180 degree when pressed on the head. 

    SHP-210D/25-240/12T/22mm/Net:16-70,70-185,240
    Indentor:1PCS,25,35,50,70,95,120,150,185, 240/Point crimping  
    HP-150D/16-150/12T/20mm/Indentor:16,25,35,50,70,95,120,150 
    Net:16-25-35,50-70-95,120-150/Point crimping 

  • Product name :Hydraulic crimping tools  
    FUNCTION  
    Press tools is suitable for DIN,AWG,JIS.  
    There is a safe protective equipment of "Kacha"
     voice when it reaches to high or low voltage.  
    Only one person can work.  
    Pump is connected to the tools, it can turn 180 degree when pressed on the head.  

    SHP-210D/25-240/12T/22mm/ 
    Net:16-70,70-185,240 
    Indentor:1PCS,25,35,50,70,95,120,150,185, 240/Point crimping   
    HP-150D/16-150/12T/20mm/ 
    Indentor:16,25,35,50,70,95,120,150  
    Net:16-25-35,50-70-95,120-150/Point crimping 

 

ATD Tools

Hydraulic Tools Wholesale Center design and processing and sales tool for businesses. The main products are: all kinds of copper and aluminum terminal crimping tools, high pressure hydraulic pump, hydraulic hole device, punching machines, bending row machine, cutting machine rows, cable cutter, hydraulic jack and a series of tools. Customer demand-oriented enterprises, the Internet as a platform to continuously upgrade its products, the introduction of advanced machining center Japan's group-wide tools into a high-precision manufacturing techniques and the introduction of 5S production management systems to low-cost, high-quality possession in the industry advantage. Corporate power, create ?100 million the Sky? as an international brand, has always insisted that ?to accompany you to the safety of construction? as the concept of professional tools to create better targeted 100 million people sincerely hope that with Mary all the friends of cooperation and seek mutual benefit to join co-operation for China's development tools industry shoulder the historical responsibility.